• SALE
    $3,699.00
    Tue, Jan 21, 12:59 PM
    Marystown, Burin Peninsula
    ENGINE TYPE Single-Cylinder CYLINDERS 1 ENGINE STROKE 4-Stroke COOLING Air VALVES 2 VALVES PER CYLINDER 2 VALVE CONFIGURATION SOHC BORE (MM/IN) 49.5 / 1.95 STROKE (MM/IN) 48 / 1.89 DISPLACEMENT (CC/CI) 89.5 / 5.5 STARTER Electric / Kick FUEL REQUIREMENTS Regular FUEL TYPE Gas CARBURETION BRAND Keihin FUEL INJECTOR No CARBURETOR Yes NUMBER OF CARBURETORS 1 CARBURETION TYPE Carburetor SPEED GOVERNOR Yes KILL SWITCH / TETHER CORD Standard TRANSMISSION: TRANSMISSION TYPE Continuously Variable (CVT) PRIMARY DRIVE (REAR WHEEL) Chain PRIMARY DRIVE (ENGINE / TRANSMISSION) Belt REVERSE Yes HI / LOW RANGE No ADJUSTABLE THROTTLE Standard WHEELS & TIRES: WHEELS COMPOSITION Steel FRONT TIRE DIAMETER (IN) 19 REAR TIRE DIAMETER (IN) 18 CHROMED No TIRE BRAND Duro FRONT TIRE WIDTH 7 FRONT WHEEL DIAMETER 8 REAR TIRE WIDTH 9.5 REAR WHEEL DIAMETER 8 FRONT TIRE (FULL SPEC) Duro Thraser 19 x 7 - 8 REAR TIRE (FULL SPEC) Duro Power Trail 18 x 9.5 - 8 BRAKES: FRONT BRAKE TYPE Dual Drum REAR BRAKE TYPE Drum SUSPENSION: FRONT SUSPENSION TYPE Independent A-Arm FRONT TRAVEL (IN/MM) 3.4 / 86 REAR SUSPENSION TYPE Swing Arm REAR TRAVEL (IN/MM) 6.3 / 160 REAR ADJUSTABLE SHOCK / SPRING PRE-LOAD No REAR ADJUSTABLE REBOUND DAMPING No NUMBER REAR SHOCK ABSORBERS 1 REAR SUSPENSION MATERIAL Steel STEERING TYPE Manual STEERING CONTROL Handlebar TECHNICAL SPECIFICATIONS: LENGTH (FT) 4.98 WIDTH (IN/MM) 35.6 / 905 HEIGHT (IN/MM) 36.8 / 935 WHEELBASE (IN/MM) 39 / 1000 GROUND CLEARANCE (IN/MM) 8.3 / 211 LENGTH (FT/FT) 4 LENGTH (FT/IN) 11.8 DRY WEIGHT (LBS/KG) 250 / 113 FUEL CAPACITY (GAL/L) 1.6 / 6 ENGINE DISPLACEMENT TO WEIGHT (CC) 0.37 SEATS: SEAT TYPE One-Piece ADJUSTABLE No SEAT MATERIAL Vinyl SEAT LOCATION Driver FOLDING No SEAT HEIGHT (IN/MM) 27 / 685 NUMBER OF SEATS 1 EXTERIOR: FRAME Steel BODY MATERIAL Plastic FLOOR BOARD LOCATION Driver HAND GRIPS Standard FRONT FENDER Standard REAR FENDER Standard HANDLEBARS Standard HANDLEBAR PADS Standard FRONT BUMPER Standard REAR BUMPER Standard A-ARM SKID PLATE (FRONT/REAR) No / No BASH PLATE (FRONT/REAR) Yes / No WARRANTY (MONTHS/CONDITION) 6 / Limit GENERIC TYPE (PRIMARY) Youth MANUFACTURER COUNTRY Canada INTRODUCTION YEAR 2002 MANUFACTURER RECOMMEND MINIMUM AGE 10 PARENT COMPANY Can-Am™ DRIVELINE TYPE 4X2 NUMBER OF DRIVELINE MODES 1 REAR UNLOCKING DIFFERENTIAL No REAR SOLID AXLE Yes LIGHTS: HALOGEN HEADLIGHT (S) Standard HEADLIGHT (S) Standard TYPE Halogen OTHER LIGHTS Standard STORAGE: FRONT STORAGE WELL Standard
  • Mon, Jan 20, 8:47 PM
    Bell island, Avalon Peninsula
    For sale Honda 85,86,87.250 fourtrax and big red parts. Call,text 709.685.0042 or email for price.
  • $175.00
    Sun, Jan 19, 10:53 PM
    Carbonear, Avalon Peninsula
    Honda 250 engine fully dressed, Got throttle, throttle cable, carburetor, start motor, kickstart, shifter $175 or trade for Dewait tools
  • $900.00
    Thu, Jan 16, 9:59 PM
    gander, Central/Interior
    Yamaha moto 4 250 forsale in decent shape for its age. Needs battery for electric start, rear breaks don’t work and will soon need new front tires. Asking 900 ono
  • $1,900.00
    Thu, Jan 16, 8:31 PM
    Freshwater, Avalon Peninsula
    I have for sale a 1986 Honda Fourtrax 250 It is in very nice condition All brakes and lights working Electric start Reverse New battery as well May trade for a 380/550 Rev 1900 oNo
  • $200.00
    Wed, Jan 15, 7:51 PM
    Grand Le Pierre, South Coast
    Kimpex outback atv cargo box. Barely used in great condition. $ 200. Polaris quick snap detachable windshield. $125 Fairing to fit Cf moto C force 500. $ 370 new. Sell for $250 Fairing is same for other cf moto models 400 to 1000 but would require a different brackets. Txt or email.
  • $150.00
    Mon, Jan 13, 12:53 PM
    St Johns/ Whitbourne, Avalon Peninsula
    For sale 1/2 windshield for 2016 Polaris 570 midsize ranger side by side. $150. ( New $250 ) 728-9913(reason for selling, bought a full one) Sent from my iPad lesley
  • $550.00
    Fri, Jan 10, 7:56 AM
    St. John's, Avalon Peninsula
    4 Polaris aluminum wheels (Part #'s 1521106 & 1521161) in Very Good condition.(No Dents , Etc).. Front Wheels: 12" X 6" , Backspacing = 4" ,, (25mm offset (4+2) ), Rear Wheels 12 x 8" with 2",, (50mm offset)(6+2), Backspacing = 6".... Bolt Pattern 4 x 156... Fits 2007 to 2009 Polaris 500 EFi & 2007 to 2008 800 EFI --- 2011 RZR XP 900 --- 2013 RZR XP4 900 EFI --- , 2014 RZR S 800 & maybe other machines... Make a "Reasonable" Offer.. I have 1.5" spacers for front wheels that will change Backspacing from 4" to 2.5".... Bearcat T6-ply Tires are 26/9/12 & 26/11/12 ..To purchase New costs more than 1500.. Rims & Spacers selling for $250 & Tires for $375 ...Rear Rims:Part # 1521161 ,,,Front Rims:Part # 1521106r **** Pictures attached..
  • $1,300.00obo
    Wed, Jan 8, 11:47 AM
    Cbs, Avalon Peninsula
    Bike runs great. E start winch lights all work. 4 new tires. Bike is reliable. Plastics in good shape not cracked up. I also have a windshield not included in picture. Front & back Boxes included. I am second owner and can provide license plate/registration.
  • Thu, Jan 2, 6:31 PM
    Marystown, Burin Peninsula
    Have parted out various Honda atv’s and have parts left from bikes I’ve built some models are 1986 Honda 250 1986-1990 Honda 350d, Honda 300 2wd & 4wd Honda 400’s and 450 95-2001 Honda 350 00-06 Honda 400 at’s Honda 420 foot shift 07-2012 Honda 500 rubicon and foot shift Honda 680’s Don’t have everything for each model but feel free to check with me if your looking for something might have ....pictures are for illustration and not everything shown is available
  • $250.00
    Sat, Dec 28, 10:54 PM
    port union, Eastern
    BIG Red frame and some parts on the frame rear rack and swing arm frame always stored in side attachment $250 Ono call or text 468-0207 cheers
  • $30.00neg
    Wed, Dec 18, 10:01 AM
    stephenville, West Coast
    looking for a recoil start for a older yamamha atv/ atc. 200 and 225 tri moto, 200, 225, 250 moto 4, 250 beartracker, and 250 timberwolf all have same pullcord. One just like in picture.
  • $80.00
    Tue, Dec 10, 11:50 AM
    Norris Arm, Central/Interior
    Selling a differential to fit a 1986 Honda Fourtrax 250 2x4. Works good but needs a pinion bearing. You can get a bearing kit on ebay for $32.00 Canadian plus shipping.
  • Sun, Dec 8, 9:20 AM
    Pasadena, West Coast
    For sale 2007 white Honda rancher 420cc in great condition. Regular maintenance, greased and oil changed every 500kms with Royal Purple oil. Electric shift. Selectable 4WD and 2WD. Hand warmers. Power steering. Large front saddle bag and detachable 2 up seat included. Warn winch also included but not installed. ITP tires on black rims and spare set of stock tires on rims included as well. 5300kms. $3700 OBO Text 250 257 0674, located in Pasadena
  • Fri, Dec 6, 11:36 AM
    Colinet, Avalon Peninsula
    Wanted King Quad 300 or 250 4x4 muffler and front driveshaft protective cage. Also looking for a left rear drive shaft for same atv and a front shock for a king quad 300.
  • Thu, Dec 5, 9:34 AM
    Marystown, Burin Peninsula
    Have some parts for a 250 Timberwolf 2000big bear professional 400, 1995 Yamaha Wolverine, 1987-1996 big bear 2003 and 2005 Kodiak 450, 1999 600 grizzly 1987 moto 4 350, 2004 Bruin 350 There are no complete bikes but I still have some parts from each model . Depending on what you need I might still have it feel free to contact me I’ll certainly check for you.
  • $1,800.00obo
    Wed, Dec 4, 7:02 PM
    Norris Arm, Central/Interior
    2000 Yamaha Beartracker 250. 5 speed semi-automatic. 2 wheel drive. Electric & pull cord start. 4 new swamp fox tires & new battery. Front & rear racks. Ball hitch. LED headlights wired to high beam switch. Back seat with cargo space. 3500lb winch & home made plow. Extremely reliable bike. Well maintained. Always stored in heated garage.
  • $1.00
    Fri, Nov 15, 11:22 AM
    victoria, Avalon Peninsula
    most all parts good many other good parts let me know what you need.