Backhoes

Looking for a couple decent Backhoe Front Tires: 12.5/80-18. Send a note if you have any available. Tks.

I'm looking to buy a old backhoe to do work around my garden if u have one or know of one please let me know

Two backhoe tires 12.5/80 /18 lot of tread remaining

NEEDS SOLD ASAP! Not shore of the year but it’s between 1978-1980 maybe newer case deisel backhoe. All the hydraulics are working good, 2 back stabilizers works good rear bucket and teeth in good shape and she has a front end loader bucket which works great! But SHE NEEDS HER VELVES SET AND SHE WOULD BE A GREAT BACKHOE! Reason why I’m selling so cheap is because I’m leaving the province. LOCATED IN SUMMERFORD!.. SERIOUS INQUIRES ONLY! Contact me for further info. 709-671-2238 or you can IMessage only 709-740-7545.

wanted a old backhoe looks don't matter e mail me or give me a call

Backhoe tires wanted Looking for 1 or 2 rear backhoe tires. Must be excellent to mint condition. SIZE 19.5L x 24 Location in NL not an issue Thank you

Ford tractor (mid 70s) with backhoe attachment and loader, brand new 39/16 rear tires. Needs some work, but everything is there.

Looking for a backhoe attachment to connect to a Class 2, 3pt tractor hitch. Have older Belarus tractor with Loader, looking to add a backhoe attachment.

1986 Case Backhoe ext hoe

Wz-25 With or without engine 40,000. Without engine With engine 69,995 standard tooth bucket, Heater, block heater, tilt steering, air over hydraulic disc brakes Overall Dimension: Length * Width * Height, 5900 * 2200 * 3769(mm), Cab roof height 2900(mm), Wheel base 2250(mm), Track 1640(mm), Min. ground clearance 300(mm), Main Technical Specification system pressure, load hydraulic system - 18Mpa, dig hydraulic system - 20Mpa, steering hydraulic system - 12Mpa, system flow 120L/min, four-wheel drive , total operating weight - 7600kg, 5 maximum speed 22Km/h, maximum gradient capacity 30°, loading bucket capacity 1m3, rated loading 2500KG,maximum articulated height of bucket 3400 mm, bucket discharge height - 2795(mm), bucket discharge distance - 1048(mm), loading lift capacity - 25KN, bucket hydraulic translation function yes, bucket lift time - 6.8s, bucket lower time - 2.5s, bucket discharge time - 1.2s, maximum tractive force - 39KN, maximum breakout force - 38KN, backacter bucket capacity - 0.3m3, backacter discharge height - 3878(mm), maximum digging depth - 4080(mm), maximum digging radius - 5688(mm), bucket slewing angle -190°, bucket digging capacity - 46KN, bucket stick digging capacity - 31KN, 100 HP Cummins diesel engine, fixed shaft power shift transmission, 2 forward Speeds/ 2 reverse Speeds, torque - YJ-280, drive pump - CDXaf3016-IL flow - 16ml/r, work pump - CBGj2063 flow - 63ml/r, Steering system - articulated hydraulic steering, model of steering control valve BZZ5-250, model of turning control valve YSF25S-00, steering angle - 36±1°left or right 36±1°, minimum turning radius - 5018(mm) Axles main transmission type - single reduction Wheel, tire size - 16/70-20, front wheel pressure - 0.22Mpa, rear wheel pressure - 0.20Mpa, service braking - air over hydraulic disc on 4 wheels,parking brake - manual parking brake Refill Capacity fuel tank - 70L, transmission - 25L, front axle - 9KG, 4 rear axle - 9KG, hydraulic tank - 140L

Looking for parts for a 1978 international backhoe. Email or call with what you have.

Homemade backhoe Honda motor make offer done what I needed it to do great for around the cabin sold sold

For sale one 3 ft bucket for rubber tire backhoe or small excavater. Can be made into nice ditching bucket. Around 13 1/2 " from centre of one pin to other. Call after 6:00 pm. No emails

For Sale Mid 70’s John Deer backhoe has 3 cylinder rebuilt engine can be heard going. For parts or can be repaired. Call Pius at 709 363-8552

I am looking for a radiator for my backhoe and a good braket that soports the rear digging arm and the swing cylinder attach to it also I'm not sure what it is called. Or maybe someone may know where I can get my radiator .

looking to possibly trade 2010 C6 3LT, Corvette Grandsport with only 14,700km. For a Backhoe or mini excavator. Looking for a value around $43,000. This car shows like new. It has two roofs, one glass and one silver. The doors open normal or vertical. Also has ZR1 ground effects and rear spoiler. The door hinges and ground effects cost $5000.

12" back bucket for cat backhoe in good condition may fit some other backhoe

SAVE up to $3105 OFF select new BX23S TLB’s ... MSRP $27,100 - $2105 Discounts - $1000 Cash Discount = $23,995+HST* (until July 31st) • BUY A NEW BX23S in September 2020 and SAVE up to $3105!! • 0% FINANCING for 84 MONTHS • Kubota Finance & Lease plans up to 84 mos • 84-Month Lease* for as low as $89 (+Tax) BIWEEKLY with $3000+HST Down • 84-Month Purchase* for as low as $145 (Incl Tax) BIWEEKLY with $3000 Down • 6-Year Warranty* • All Financing OAC * Inquire today!! See us for full details.

New hammer bit for different types of backhoes

A set of lifting forks for 310 SJ John Deere Backhoe.