• $0.00
    Sat, Jul 21, 10:06 AM
    Placentia, Avalon Peninsula
    Wanted parts for an 1986 Mack truck - mainly camel back suspension & rear ends Call or text 709-227-4751 or email with what you have
  • $9,200.00obo
    Fri, Jul 20, 5:17 PM
    Torbay, Avalon Peninsula
    1994 GROVE CRANE CARRY/FLAT DECK with rubber tires. Has a 36 foot reach. In good working condition. Asking $9,200 obo. If interested, call Sel at 689-9122 for more information. May not respond to texts or emails.
  • $29,900.00obo
    Fri, Jul 20, 12:52 PM
    Lewisporte, Central/Interior
    I have for sale a 1994 Cat 307 Excavator. Showing 2600 plus hours on the meter. She is in excellent shape and ready for work. Call 541-2186 for more information or come take a look. New paint job.
  • Thu, Jul 19, 10:18 PM
    Topsail, Avalon Peninsula
    Wanted to buy a rock crusher in good working condition
  • $5.00
    Thu, Jul 19, 10:16 PM
    Placentia, Avalon Peninsula
    Selling a quantity of these 24 inch long Y-Adaptors. They have been used but are in excellent condition. $5 each.
  • $7,500.00
    Thu, Jul 19, 5:19 PM
    Wabush, Western Labrador
    Snow plow, wing and spreader to fit a dump truck. $7,500 for the wing and blade. $4,500 for the spreader. Call for details!!!
  • Thu, Jul 19, 9:24 AM
    Mount Pearl, Avalon Peninsula
  • SALE
    Wed, Jul 18, 5:37 PM
    Triton, Central/Interior
    Standard equipment of JC60/60G: 1. Open-type Operator Cabin 2. Mechanical Control System 3. USA Eaton or Italy B.P brand hydaulic pump 4. USA Eaton brand hydraulic motor 5. Chinese Xinchai 498 Engine/ Original Hyundai Engine EU IIIa(For JC60G) 6 USA White brand hydraulic gear pump 7. Hydraulic brake 8 tire:12x16.5 tires 9. 74’’ Standard Bucket 10. Flat-type quick coupler same as Bobcat 11.Rated operating Capacity:850kg; Bucket capacity:0.5m³. A. Height at Maximum Extension---3690mm B. Hinge Pin Height---2920mm C. Total Height---2080mm D. Length with Bucket---3440mm E. Length without Bucket---2640mm F. Width with Bucket---1880mm G. Track Width---1500mm H. Wheelbase---991mm J. Ground Clearance---205mm K. Dumping Angle---40° L. Dumping Height---2330mm M. Maximum Reach---710mm
  • $359,000.00
    Wed, Jul 18, 3:12 PM
    Wabush, Western Labrador
    2014 GT-200 Hot Water Trailer. Hours: 50. Unit # HWT-01. Operational Data - Fuel Consumption rate of 167 GPH at full fire - Flow Rates up to 1450 LMP - Temp rise of 60?C at 1000 LPM - Time to heat 400 bbl. Tank 0 degrees C to 30 degrees C in 22 minutes - Output Rating 20,000,000 BTU - Three temperature gauges – one mounted at stack to measure exhaust temperature, one mounted on intermediate coil for coil temperature, and one mounted to measure discharge temperature - High temperature shutdown – Thermostatically controlled positive action, direct control shutdown, temperature probe shall extend into the inner coil in the heater(tub) end - Heat to be supplied horizontally allowing for two pass heat transfer over the three cylindrical coils. - Plenum Chamber exhaust - Three Cylindrical Coils (Size 3 inch – A106B/Schedule 40) containing no more than 46 internal welds - Chrome “T” shaped stack preventing rain ingress (Protection from the elements) - Hydraulically Driven Combustion Air Blower Fan - Hydraulically Driven Fuel Pump - Fuel Pump Pressure Gauge - Intrinsically Safe Electronic Ignition - CO2 Fire Prevention provided on heater - Removable inspection plate on heater front face plate - Two sight glasses - Atomizing Air and Fuel Pressure gauge Low Pressure Pumps Hydraulically driven low pressure pumps consisting of: - Circulation Pump 4x3 Centrifugal Pump - Maximum Pressure – 175 PSI & Maximum RPM – 3000 RPM - Load/Unload Pump – Gear (helical gear design) Pump - Maximum Pressure – 125 PSI / Maximum RPM – 750 RPM Engine - 250 HP (approximate) Diesel @ 2400 RPM - Block heater – 110 V - Batteries – (1) 12 V mounted in a battery box complete with battery disconnect switch - Rig Saver - 30 CFM Compressor Crude/Storage Tank - Specification: TC-406 (DOT 406) - Capacity 13.2 m3 - 2 Compartments for diesel/heater fuel and freeze protection/flush - Full Opening Hatch per compartment – 16 inch - Vent Line – 2 inch - Vent Line ladder at rear of unit - Placard Mounts – Dangerous Goods - Internal Dial Gauges – Stainless complete with Labels Control/Safety Panel (Mounted in Control Cabin) - Control Panel enclosed - ESD Switch - Electronic Throttle - Air Toggles - Air Pressure Gauge 0-160 PSI 2 ½” - Hydraulic Pressure Gauge 0-5000 PSI 2 ½” - Heater Controls Mounted on Control Panel Hydraulics - Hydraulic Piston Pump for Circulation/Centrifugal Pump - Hydraulic Gear Pump for the Blower, Fuel Pump and load/unload gear pump - Directional valves for blower and gear pump - Hydraulic Cooler - Hydraulic Filters - Hydraulic Tank Fire Extinguishers - 50 lb C02 - Direct coupled to heater - 5 lb Mounted in operator Cabin Cabinets - (1) Cabinet for Storage – (Approximately 24” x 24” x 24”) - (1) Cabinet for Storage – (Approximately 24” x 24” x 48”) - (1) Cabinet for Storage in Operator Cabin Control Cabin - Insulated & Heated - Windows – Front (fixed) & Rear (sliding) - Roof Vent - Bench, Cabinet, and Shelving - (2) Interior Roof Lights Trailer - 40 Ton (53 ft) Tridem Trailer – Air Ride Suspension - Full Deck with Stairs for deck access Centralized Digital Controls - In cab display - USB Recording Capabilities - Pressure Sensors - Temperature Sensors - Flow Rate Display (turbine) - Units to be displayed in Metric or Imperial
  • Tue, Jul 17, 2:52 PM
    Goulds, Avalon Peninsula
    ISLAND WIDE shipping. Direct Bolt In. Call or email for pricing on F250 and F350. Driveshafts at affordable prices using state of the art equipment. Drive line machine shop specializes in new and remanufactured driveshafts for most domestic vehicles, heavy equipment, trucks, autos, hot rods, race cars, 4 x 4's, boats, printing presses, industrial equipment and custom applications. All of our driveshafts are made with high quality parts that meet or exceed OEM tolerances, and are high speed balanced on one of our worlds most accurate dynamic balancer. We also re-manufacture steering shafts for common cars and trucks. Call for details and price. Open 7:00am to 5:00pm (5 days a week).
  • $150.00
    Mon, Jul 16, 5:00 PM
    Placentia, Avalon Peninsula
    1 skid steer track for sale. In good shape overall. Good for a spare. Size is 400 x 72 x 72 . Caterpillar bobcat John deere.
  • $25,000.00neg
    Tue, Jul 10, 2:11 PM
    Happy valley goose bay, Eastern Labrador
    1988 ford cargo with auxiliary engine and blower attachment. Great working condition, was used on the happy valley goose bay runway up until last year. Less than 10,000 hours on the machine. Blower head was fully rebuilt 2 years ago. Runs flawless and even starts well in the cold. I have a second one I will be selling along with it as a package. The second one has the axillary engine removed but still has the hydraulic pump/tank equipped. The front drive engine is also in good working order. Both blowers come with full tanks of fuel which equals roughly 1800 liters between both of them and 2 spare rims and 1 spare tire alrady on a rim comes with them. I also have all the parts and service manuals for these they will be provided as well. I am asking 25,000 for the pair along with everything listed. If you need more information or pictures feel free to ask.
  • $500.00
    Tue, Jul 10, 10:31 AM
    Gander, Central/Interior
    Pto cement mixer heavy duty
  • $3,250.00obo
    Thu, Jul 5, 5:13 PM
    Placentia, Avalon Peninsula
    For sale Post hole auger to fit rubber tire backhoe call or Text Wayne at 709-227-4751
  • $800.00
    Thu, Jul 5, 8:34 AM
    Tors Cove, Avalon Peninsula
    Heavy duty plate tamper Electric start&reverse 1 hr use on new 13 hp engine
  • Wed, Jul 4, 8:30 PM
    Carmanville, Central/Interior
    Looking to buy a screener. Please email or phone. 709-534-7552
  • Tue, Jul 3, 6:24 PM
    Harbour Grace, Avalon Peninsula
    8 ton CM Cyclone chain hoist Call for more information
  • $300.00
    Tue, Jul 3, 6:23 PM
    Harbour Grace, Avalon Peninsula
    Myers 3-phase Sump and Effluent Pump.
  • $2,000.00neg
    Tue, Jun 26, 3:48 PM
    St Joseph's cove, South Coast
    440 John deer skidder.4 great 18.4x26 tires, excellent differentials. Excellent running 4 cylinder model 4219 John deer engine.no blade or winch on machine. Machine drives and breaks work. new alternator and starter.
  • $4,500.00neg
    Sun, Jun 24, 1:18 PM
    King's Point, Central/Interior
    1980 Mack Dump Truck, 350 Mack engine with Mack transmission $4500