PREMIUM AD
  • Storage/Shipping Containers - 20 FT & 40 FT
    Shipping Containers available for sale. Good condition - No leaks or major damages. 20 FT CONTAINERS 20 FT - $ 2500 + HST CONTAINER SPECS DIMENSIONS: METERS: 6.058 X 2.438 X 2.591 FEET: 20 X 8 X 8.5 INSIDE CUBIC CAPACITY: 33 CBM MAX GROSS WEIGHT: 30,480 KG 40 FT CONTAINERS 40 FT - $ 3000 + HST CONTAINER SPECS DIMENSIONS: METERS: 12.192 X 2.438 X 2.591 FEET: 40 X 8 X 8.5 INSIDE CUBIC CAPACITY: 76 CBM MAX GROSS WEIGHT: 30,480 KG More amazing usages for storage containers: Delivery services available, please contact Tel: 725-6425 or Toll Free: 1-877-753-3070 for more info. Visit us online at:
      Argentia, Avalon Peninsula
  • SALE
    $57,995.00
    Thu, Dec 13, 9:26 AM
    Triton, Central/Interior
    The ZL28F Cloud Pillar is a 2.8 ton wheeled loader which comes with a 102 HP Cummins engine, 4WD torque converter, standard tooth buck, 16/70-24 tires, 2 cab heaters, block heater, adjustable steering, tilting cylinder increased from 4" up to 5" for better performance, auxiliary hydraulics hoses increased from 1/2" up to 3/4" for increased flow, upgraded radiator and transmission cooler, winter grade fluids, electronic shift, 4 way joystick control, quick disconnect coupler, hydraulic cooler, 2 sliding windows in the cab, 10' snow blade with hydraulic angling, set of 4' forks & back up camera!
  • SALE
    $30,900.00
    Thu, Dec 13, 8:08 AM
    Mount Pearl, Avalon Peninsula
    TAKE ADVANTAGE OF OUR END OF SEASON CLEAR OUT!! 2018 YANMAR VIO17 MINI EXCAVATOR * 3836 LB OPERATING WEIGHT * 7' 3" DIGGING DEPTH * ZERO TAIL SWING * ADJUSTABLE WIDTH TRACKS * 12' DIGGING BUCKET * FINANCING AVAILABLE O.A.C.!!
  • $400.00
    Thu, Dec 13, 7:59 AM
    Paradise, Avalon Peninsula
    For Sale: Energic 48V, 140amp DC out, 3 phase 208/240/480V. AC in. Was $1100 new (2012) Selling for $500. NOW - $400 In great condition, works perfect. Email please.
  • SALE
    $21,000.00
    Thu, Dec 13, 7:56 AM
    Mount Pearl, Avalon Peninsula
    ONLY 1 LEFT!! 2018 YANMAR SV08 MINI EXCAVATOR * 2348 LB OPERATING WEIGHT * 4FT 11" DIGGING DEPTH * ADJUSTABLE WIDTH TRACKS (2' 3" TO 2' 9") * FOLDABLE ROPS * ONLY $21,000.00 * 12" DIGGING BUCKET * FINANCING AVAILABLE O.A.C.!!
  • Wed, Dec 12, 9:55 PM
    Norris Point, West Coast
    2003 f350 dump truck 13 foot dump 7.3 power stroke automatic transmission runs good pm for details asking 3500 obo
  • $1,250.00obo
    Wed, Dec 12, 9:39 PM
    Mount Pearl, Avalon Peninsula
    Aluminum truck body 12 feet over all length (9ft at full height + 3ft overhang), approximately 7 feet inside, insulated, stainless hardware, exterior cabinets for generator, welding machine or tool boxes. Heater to hook up to the vehicle cooling system, lots of lighting. 6 years old, just removed from a F-550 that came from Ontario. Would make an awesome service body. Private sale. $1250 ono.
  • $800.00firm
    Wed, Dec 12, 9:13 PM
    Paradise, Avalon Peninsula
    HLA pallet forks will fit a skid steer or kubota/Kyoti tractor etc. 1200lb capacity. They have 2 hours use. No longer need them. Paid $920 want $800 firm.
  • Wed, Dec 12, 8:40 PM
    South River, Avalon Peninsula
    Heli 3 stage and side shift H2000 50 series forklift With 4 cylinder Nissan engine All new tires, 650 hours, fuel propane . Forklift works perfect needs nothing. Regular maintenance. Only used for light duty inside warehouse. Call 683-0276 or email if interested. Open to reasonable offers
  • $6,200.00
    Wed, Dec 12, 8:17 PM
    Witless Bay, Avalon Peninsula
    One 7,6 fisher snow plow ht series.in excellent condition.
  • $110.00/hr
    Wed, Dec 12, 6:19 PM
    Mount Pearl, Avalon Peninsula
    Atlantic Powertrain is a certified commercial inspection station. we have fully certified service technicians that can help you with anything you need. we do repairs, complete services, and commercial inspections for all makes and models of heavy equipment. Don't forget to call the parts department for all after market heavy equipment parts. we cater to all makes and models.
  • $750.00
    Wed, Dec 12, 5:04 PM
    Bonavista, Eastern
    Knife sharper for planner
  • $55,000.00
    Wed, Dec 12, 5:02 PM
    Deer Lake, West Coast
    525 keto head in good working condition, working daily
  • $40,000.00
    Wed, Dec 12, 5:02 PM
    Deer Lake, West Coast
    1996 9020 Case wood loader good working condition
  • SALE
    $26,995.00
    Wed, Dec 12, 4:57 PM
    Triton, Central/Interior
    SAVE 23,000 !!!!!!!! going below cost just to clear out Standard equipment of JC60/60G: 1. Open-type Operator Cabin 2. Mechanical Control System 3. USA Eaton or Italy B.P brand hydaulic pump 4. USA Eaton brand hydraulic motor 5. Chinese Xinchai 498 Engine/ Original Hyundai Engine EU IIIa(For JC60G) 6 USA White brand hydraulic gear pump 7. Hydraulic brake 8 tire:12x16.5 tires 9. 74’’ Standard Bucket 10. Flat-type quick coupler same as Bobcat 11.Rated operating Capacity:850kg; Bucket capacity:0.5m³. A. Height at Maximum Extension---3690mm B. Hinge Pin Height---2920mm C. Total Height---2080mm D. Length with Bucket---3440mm E. Length without Bucket---2640mm F. Width with Bucket---1880mm G. Track Width---1500mm H. Wheelbase---991mm J. Ground Clearance---205mm K. Dumping Angle---40° L. Dumping Height---2330mm M. Maximum Reach---710mm
  • Wed, Dec 12, 4:31 PM
    Clarenville, Eastern
    Looking for a line skidder in running or non running condition. Not looking for anything smaller than a C4 TreeFarmer or 208 TJ. Please call, text or Email if you have anything for sale.
  • $8,999.00
    Wed, Dec 12, 3:17 PM
    Mount Pearl, Avalon Peninsula
    Check out the full line of galvanized trailers from N&N Trailers including the ID Series and RD Series of dump trailers. All trailers are Hot Dipped Galvanized to prevent rust and corrosion. Also N&N builds all dump trailers with galvanized axles, galvanized wheels and galvanized backing plates so this trailer is built tough! A little grease and regular running gear maintenance is the only thing this trailer needs. Less time in the shop repairing issues caused by rust and corrosion means more money in your pocket. Yes a little more money up front but the long term payoff is well worth the extra dough! The "ID Series" is available in sizes from 5x10 up to 6x12 and axles sizes from 3500lb per axle to 5200lb per axle. If you are looking for something a little heavier, check out the "HD Series", built to take a beating! These trailer are extra deep, include (4) welded D Rings inside the bed, and include a set of HD Ramps for loading equipment. Also standard on the HD Series dumps is a set of rear drop leg jacks to help carry the weight while loading equipment. ALSO another standard feature of all the N&N dump trailers is a battery charger. If you have this parked by you house, garage, shop, etc and are not using it, just plug an extension cord to the charger and it keeps your battery fully charged. Saves the headache of loading up the trailer and not being able to dump it because of a dead battery. Nothing worse than unloading a dump trailer by hand!! Ask around and you will see for yourself, N&N Trailers are built to last,,,,,,,,,,,,,rust free!!!! The last trailer you will need to buy unless you lend it to a buddy who can destroy everything! Prices starting at $8999. Financing Available!
  • $110.00firm
    Wed, Dec 12, 2:40 PM
    Hearts delight, Avalon Peninsula
    For sale 21 pc. 3/4” drive socket set (sizes 7/8” - 2”) new , lifetime warranty
  • SALE
    $28,995.00
    Wed, Dec 12, 2:33 PM
    Triton, Central/Interior
    SAVE $20,000 JUST ARRIVED 2 ton Forklift specification, Model LG20GL(T)III Power type Gasoline, LPG(Propane) Rated capacity 2000kg, J Load center 500mm, H1 STD Maximum lifting height 3000mm, H3 Free lifting height 110mm, Fork size 1070×120×40mm, Mast tilt angle F6/R12 deg, Forward Overhang 448mm, Rear Overhang 500mm, Outline dimension: Overall length 3670mm, Overall width 1165mm, Mast lowered height 2135mm, Overhead guard height 2130mm, Fork height 974mm, Minimum turning radius 2300mm, Min. right angle stacking aisle width 3950mm, Maximum speed(full load/empty) 18.5/20 km/h, Max lifting speed(full load/empty) 510/480 mm/s, Max. grade ability 20 %, Self weight 3260kg, Front tyre 7.00-12-12PR, Rear tyre 6.00-9-10PR, Track front 970mm, Track rear 980mm, Wheel base 1650mm, Mini ground clearance Mast 135mm, Mini ground clearance frame 160mm, Engine - Nissan K21, Nissan K25, Power rating 31/37 kw, Rated torque 143/1600 176/1600 N·m/r, Number of Cylinders 4, Output volume 2.065/2.488L, Fuel tank capacity 50 ltr If you have any further questions please give us a call @ 709 263 2412 or email us @ budgells_sports@hotmail.com
  • $3,000.00
    Wed, Dec 12, 2:29 PM
    Lewisport, Central/Interior
    Portable Sawmills by Woodland Mills Pick up in Lewisporte price below or can be drop shipped directly to your door extra charge may apply. Units can be assembled for extra fee. currently have HM122, HM126, HM130 units available for viewing Also selling blades and accessories for mills HM122 Portable Sawmill $3000.00 7 HP Kohler Engine & 22 Inch Log Diameter Capacity Woodland Mills designed the HM122 sawmill for budget minded customers looking at getting into milling their own lumber at a reasonable price point. Based off of our very popular HM126 model, the HM122 offers hobby sawyers an economical and well engineered mill. Ability to mill logs up to 22” in diameter and 10’ in length. HM126 Portable Sawmill $3900.00 9.5 HP Kohler Engine & 26 Inch Log Diameter Capacity HM126 Portable Sawmill with 9.5 horsepower Kohler engine. Ability to mill logs up to 26” in diameter and 10’ in length. Additional tracks can be purchased to increase log length capacity. Hm126 14HP Sawmill $4100.00 HM126 portable Sawmill with 14 horsepower Kohler engine. Ability to mill logs up to 26” in diameter and 10’ in length. Additional tracks can be purchased to increase log length capacity. HM130 Portable Sawmill $4800.00 (electric Start) 14 HP Kohler Engine & 30 Inch Log Diameter Capacity HM130 Portable Sawmill with 14 horsepower Kohler engine. Ability to mill logs up to 30” in diameter and 10’ in length. Additional tracks can be purchased to increase log length capacity.
  • $34,500.00
    Wed, Dec 12, 2:27 PM
    Mount Pearl, Avalon Peninsula
    Newfoundland dealer for Vibroscreen. NEW SCM-40 SCREENERS ARRIVING SOON. FINANCING AVAILABLE Screeners starting at $34,500.00 (includes delivery to Newfoundland)  The Vibroscreen product line offers a range of robust and high-quality portable screeners, which enables a high-level screening process and increased productivity. The Vibroscreen line consists of several models that are equipped with vibrating heads—with or without an output conveyor and a rotative screen.. The screeners are designed to transport and quick installation adjusted to your work. Ideal to develop your material, Vibroscreen screeners are destined for a multitude of sectors and applications, including compost, topsoil, sand, gravel, stone, treatment of waste and many other bulk materials. Vibroscreen screeners are designed with vibrating heads with two decks. The vibrating heads can work in two ways: “normal” (flow direction) and “reverse” (opposite direction). While working in “Normal” mode, the material moves quickly on the screen and accelerates productivity. While working in “Reverse” mode, the material moves slowly, extending the screening time and maximizing the amount of soft material obtained. Vibrotech is a manufacturing company operating for nearly 30 years in the design, manufacturing and installation of industrial equipment. Our equipment can be found in several sectors, such as recycling construction and demolition waste (C&D), mines, quarries, port facilities, and the biomass industry. Our expertise has been leveraged in several valorization projects regarding residual material and to solve problems of all kinds. Well-established in the community, Vibrotech has managed, over the years, its development by offering turnkey solutions to its clients and taking part in all project phases (engineering, design, manufacturing, quality, delivery and supervision of installation). The company offers facilities and production equipment for high capacity and human resources with a rich and professional expertise. This diverse knowledge allows Vibrotech to take on more complex challenges with respect to industrial equipment. The Vibrotech team will always be honored to count you among its customers, whether located in Quebec, Ontario, in Maritimes, United States or elsewhere in North America. Rest assured that the our team will meet address your challenges and adhere to your requirements to make your projects a success for your business.