|
-
Sat, Jan 9, 2:27 PM
La Scie, Central/Interior
For sale Nl Cod Pots made by Hampidjan Canada. Going for a bargain, make me a
offer.
-
Sat, Jan 16, 10:59 AM
CBS, Avalon Peninsula
Newfoundland Marine Vessel Transport
Looking to get a boat moved? Chris Porter Trucking LTD is well known across
the province for Boat Transportation Services throughout North America. We are
the only company in the province with the proper equipment, experience and
professionalism to relocate your investment without worry!
The safest place for your vessel besides the water is on one of our boat
trailers! We will work with you to create a plan that best suits your needs!
Give us a call and check out what we can do for you.
Chris Porter Trucking Ltd
Chris Porter
709-682-7335
-
$225.00
Fri, Jan 15, 8:55 AM
St.John's, Avalon Peninsula
Power Takeoff Clutch 18 Inch Housing 2 In shaft
-
$1,000.00
Fri, Jan 1, 11:12 AM
hambden, West Coast
double ender,,no motor has 50gal stainless tanks part finished in side but
needs worl,,hull is perfect,,1/2 in fg,,,,,any one hav pic of one like this cut
off with transom,,,has hydraulic helm could be neg,,,,,,29 ft,,,,fishin tow
like triler,,,very deep wide
-
$100.00obo
Sat, Dec 5, 8:16 AM
Dunville, Avalon Peninsula
Manual marine toilet in good condition
-
$400.00obo
Tue, Jan 19, 9:02 AM
Dunville, Avalon Peninsula
Viking Solas 74/96, 10 person life raft. Type 10DK+S30. Manufacture date =
02-2006. Requires inspection.
Canister in excellent condition
-
$300.00
Tue, Jan 12, 4:08 PM
Upper island cove, Avalon Peninsula
10ft of 2 1/4 stainless tail shaft in good shape $300 683-6895
-
-
$200.00obo
Wed, Dec 16, 11:59 AM
pollards point, West Coast
2-- 5 inch x 8 ft brass exaust tubes
-
$250.00obo
Sun, Dec 27, 10:50 AM
Dunville, Avalon Peninsula
Tiller handle removed from 40hp Suzuki has electric start and power trim.
Everything is there for hookup.
-
$800.00obo
Tue, Dec 1, 10:39 AM
Durrell,NL, Central/Interior
FOR SALE—One DIAMOND TREAD ALUMINUM PLATE FUEL TANK. It Is Manufactured From
7/16 Aluminum Plate and Is Suitable For Both Diesel Fuel And Gasoline. It
Measures 25 in wide x 14 in deep x 46 in long, And It Has Openings For 2 Inch
Fuel Fill, And A Smaller Outlet For Venting. In Addition, There Are Drain Plugs
Fitted. Call Phil, Text Or Email at 709-884-6353
-
$1,100.00obo
Mon, Jan 18, 10:07 PM
Durrell,NL, Central/Interior
FOR SALE—A FOUR WING BRONZE Marine Propeller Diameter 28 in x 20 In PITCH, And
Is a RIGHT HAND Swing. The Prop Is Machined To Fit a 2 inch Shaft. This Can be
Seen In The Photo. Asking $1100 ono. Call, Text or Email Phil at 709-884-6353.
This Prop Was Purchased From IMP, And Has IMP 1010 Stamped On It.
-
$275.00neg
Thu, Jan 7, 11:37 AM
Durrell,NL, Central/Interior
FOR SALE—HYDRAULIC STEERING RAM Manufactured by BENDIX. Item Is In Good
Condition. Call, EMail or Text Phil 709-884-6353—PRICE REDUCED From $375
-
$600.00obo
Tue, Dec 1, 10:40 AM
Durrell,NL, Central/Interior
FOR SALE—One STAINLESS STEEL Fuel Tank. It Measures 13 in wide x 60 Inches
Long, And Has Approximately 25 Gallons Capacity. Ideal For Diesel Fuel Or
Gasoline Applications. Call Phil, Text Or Email At 709-884-6353
-
$75.00firm
Thu, Dec 10, 9:43 AM
St. John's, Avalon Peninsula
These are fine German quality suitable for through hull fitting.They sell in
Europe for 10.25 British pounds each, with high current draw halogen bulbs. I
have TWO left. price is for two
-
-
$995.00obo
Thu, Jan 21, 9:50 AM
Durrell,NL, Central/Interior
DANIELS Radiotelephone used in my 48Ft Cabin Cruiser. Unit works perfectly,
however the Antenna got damaged. The Antenna Tuner is included plus all Cables
and Hardware needed to install the Unit. Call Phil, or text or email, at
708-884-6353
-
$175.00neg
Tue, Dec 1, 10:39 AM
Durrell,NL, Central/Interior
I Have a 3 Blade Propeller For Sale. It Was Used In My Trap Skiff With a 10 HP
Air Cooled Diesel. It Is 18 inch Diameter, Not Sure of the Pitch. The Bore is a
Tapered Hole That is 1.25 inch Down to 1 inch. Call, Text or Email Phil at
708-884-6353
-
$400.00obo
Mon, Nov 30, 5:58 PM
Durrell,NL, Central/Interior
FOR SALE—A BRONZE SHAFTLOG FOR A 1 and 1/2 inch(1.5) Shaft. This is a High
Quality item in Mint shape, Manufactured by BRYDON Manufacturing of Toronto.
INCLUDES 1.5 inch Right Hand Stuffing Box, Allowing for a COMPLETE
Installation. Please Call, Text, or email Phil at 709-884-6353
-
$80.00obo
Mon, Nov 30, 5:58 PM
Durrell,NL, Central/Interior
FOR SALE——ONE MARTYR BRAND LARGE ZINC HULL ANODE. It Measures 14 in x 7 inch,
and can be Bolted or Welded to the Hull of a Boat. This a Brand New, never Used
item. It sells for $150 including tax at Mercers Marine. Call, text or email
Phil at 709-884-6353
-
$400.00obo
Mon, Nov 30, 5:58 PM
Durrell,NL, Central/Interior
FOR SALE—-One LEFT HAND SWINGING BRONZE BOAT PROPELLER, manufactured by
Hawboldt. It is an 18 inch Diameter x 14 inch Pitch, and fits a 1 and 1/2 inch
Diameter Shaft. Call Phil, or text or email 709-884-6353. Item in excellent
shape with no visible damage.
-
Tue, Jan 12, 4:05 PM
Upper island cove, Avalon Peninsula
10-12 ft of 4" intermediate shaft with couplings make offer .
-
|