Marine

FOR SALE——ONE MARTYR BRAND LARGE ZINC HULL ANODE. It Measures 14 in x 7 inch, and can be Bolted or Welded to the Hull of a Boat. This a Brand New, never Used item. It sells for $150 including tax at Mercers Marine. Call, text or email Phil at 709-884-6353

FOR SALE—One DIAMOND TREAD ALUMINUM PLATE FUEL TANK. It Is Manufactured From 7/16 Aluminum Plate and Is Suitable For Both Diesel Fuel And Gasoline. It Measures 25 in wide x 14 in deep x 46 in long, And It Has Openings For 2 Inch Fuel Fill, as Well As 1 and 1/4 inch—-7/8 inch—-and 5/8 inch openings. And A Smaller Outlet For Venting. In Addition, There Are Drain Plugs Fitted. Call Phil, Text Or Email at 709-884-6353

I Have a 3 Blade Propeller For Sale. It Was Used In My Trap Skiff With a 10 HP Air Cooled Diesel. It Is 18 inch Diameter, Not Sure of the Pitch. The Bore is a Tapered Hole That is 1.25 inch Down to 1 inch. Call, Text or Email Phil at 708-884-6353

FOR SALE—One STAINLESS STEEL Fuel Tank. It Measures 13 in wide x 60 Inches Long, And Has Approximately 25 Gallons Capacity. Ideal For Diesel Fuel Or Gasoline Applications. Call Phil, Text Or Email At 709-884-6353

For Sale One STAINLESS STEEL RUDDER Measures 13 Inches By 16 Inches. The Mounting Plate Measures 4.75 Inches Square. Had to Saw Off In Order To Remove From Boat. That Piece Is 16 Inches Long. Call Phil at 709-884-6353, Text or Email

For sale 39,11 x 16’ fibreglass fishing boat with 210 cummins , twin disc transmission , blades 24”x26 pitch excellent sea boat on the water all glass from wheel house back including fish hold lots of glass on boat almost 1” thick will soon need new gelcoat to get the shine back in it and new coat of paint inside. Top of wheel house is bad will need a new top on wheel house comes with all electronics , power steering cooling pipes only used 2 years Price is negotiable wants gone to good to let go bad not to use. Boat is located in cow head northern peninsula Please call 243-2207. Or 660-3346. Ask for garland or darcy

new 22lb navy anchor 10 ft 3/8 chain and 70 ft rope with thimbles 100.00 old time tank and stand for stove honda pull cord for 13 hp

3 honda trim gauges 1 honda rpm gauge 50.00

36 in stainless steel swedish scallop drag for sale no hauler needed 300.00

For sale a 2013 90 Yamaha motor crank bearings are gone and got a good leg on it

New cast net for sale. Made by an experienced knitter.

My raw water filter plugged up, engine overheated and engine broke-up. 2400 hours on engine. All parts are in good working order. Mixing elbow and water pump are new. Mixing elbow and raw water pump cost over $1,000.00 each.

Dock edge or anchor buoy 24 inch.Holds air just a bit faded from the sun otherwise good condition. $30

Looking for 3C Green Bay crab license to buy or lease.

Looking to buy 3KD Enterprise with Single Crab Quota , Single Cod and Lobster . Only need Paperwork since I have Gear now. Email with price.

Looking to purchase a buyers license for NL AREA for lobster mainly or if you have one with crab even better call my house 1(709) 271 2037 or my cell 709 649 2445 ask for Justin.

3HP Johnson Works perfectly, Bought this Thursday past, used it all weekend. Only reason I’m selling is because it is not powerful enough for my 12 foot Jon boat. Only defect Is a crack in the top plastic cover which does not affect performance whatsoever. $550 ono Can be seen running prior to purchase. 693-2622

Marine hot water tank. 12 US gal. Removed from cabin cruiser. Working when boat was used last year. Call or text 709 571 1767.

I am building a boat. I'd like a wheel to fit my Seastar hlm (3/4"tapered).. I am looking for something no bigger than 24'' and no smaller than 15''. I'd love something with a story behind it.

Squid shuckers for sale $5.00 each