pallets in Newfoundland Labrador

9 pallets $125.00

Pallets regular and hardwood roughfully 8or9 hundred available

Four way pallets. 40x48. 1000 or more available. phone or text. 6.50 delivery available for a fee.

Two pallet jacks, one won’t go down and the other one works fine but needs the two smaller wheels. $100 each ono.

Pallet Racking cross beams 9 foot long 6 inches thick 4 sections $40 each

1 year old Clark WPX45 electric pallet jack. 4500lb capacity Load stabilizing wheels Maintenance free battery pack Only 509hours $8,500.00 for a brand new one this one is selling for only $5,500.00 Contact Darrell Bennett at 709-690-8045 or email dbennett@emsltd.ca

Coffee table made from salvaged pallet boards. Glued and screwed together with the pocket hole screw jig. Solid little table with a rustic look. End table available as well. End table measurements19"L x 19"W x 22" highCoffee table measurements 36"L x 19"W x 18" high

Toyota Material Handling introduces the Tora-Max Electric Walkie Pallet Jack. An ideal choice for material transportation, whether you’re working inside trailers or delivering to assembly lines. Designed to carry up to 4,000 lbs., it’s capable of lifting even the heaviest loads with ease. Call your Liftow dealer at 709 754 3012 to get yours today!! PERFORMANCE 24 Volt electrical system AC drive motor Thermal Protection & Current Limiting Transistor Drive Control System Regenerative Braking Contactor-less Drive Controls Electric Lift and Lower Anti-roll Back System Fused Control and Power Circuits High Ground Clearance

Made out of pallet material blue blocks are pine

LIFTOW LIMITED on Kenmount Road in Paradise is your Atlantic Canada dealer for Mecalac construction equipment. Call 709.754.3012 today to inquire. CRAWLER SKID-EXCAVATORS and WHEEL EXCAVATORS from 6 to 15 ton. Standard with Excavator Bucket, Skid Bucket and Pallet Forks. BACKHOE LOADERS - SIDESHIFT and CENTER MOUNT, SWING LOADERS, ARTICULATED LOADERS, and DUMPERS Check out Mecalac at www.mecalac.com for further details on the company and products. Follow us on Facebook for videos, daily updates and news from Mecalac!! "Mecalac Newfoundland and Labrador"

Engine : Low-noise, water-cooled Deutz TCD 2.9 L4 turbo diesel engine with intercooler 2300 rpm, 55.4 kW / 75 hp (74.3 imperial hp) Operating weight: 5410 kg (11,927 lb) Fuel Tank : 87 liters (23 gal) The AX1000 is equipped with Bucket and Pallet Forks - Mecalac Self Stabilizing Concept - Panorama Cab with All-Round Visibility - Intelligent Cooling Concept with Hydraulic On Demand Fan Control - Optimum front and rear view due to monoboom and compact rear end - Electro-Hydraulic brand-compatible Quick-Coupler Comprehensive Warranty of 60 months or 3000 hours, whichever occurs first. Extended options available. Contact Liftow for further enquiries at 709 754 3012 Mecalac makes a compact class construction equipment that is manufactured in France, Germany, the UK and in Turkey, and distributed from their facility in Norfolk, Massachusetts, USA.Check out the entire Mecalac Product Line at: https://www.mecalac.com/en/products.html

The Mecalac 6MCR Excavator 2-piece boom with proportional offset With the ability to switch from a compact track loader to an excavator in seconds, as well as having the option to use your pallet forks when needed; The MCR series is 3 machines in 1. Reducing your maintenance costs, insurances, warranty costs, float/transport costs, and fuel consumption.• Standard Operating Weight: 5700 kg (12,600 lbs.) – with Counterweight (6100 kgs) (13,450 lbs.) • 74 HP Deutz TD 2.9 L4 (No DEF, DPF Required) • Comes with 3 attachments plus Hydraulic Thumb (available with the 2-piece boom with offset only) • Comes with the optional counterweight (400kgs) • Skid Bucket with cutting edge (80”), capacity 490 l (0.64 yd3) • Digging Bucket 24” • Maximum reach 21’ • Vertical Digging Depth, maximum, with standard bucket 6’ 11” • Maximum Digging Depth 11’ 1” • Maximum lifting capacity with Loading Hook (without tools, bucket, shovel) is 3T (6610 lbs.) * • Fuel tank 70 l (18.5 gal.) • Hydraulic Standard Auxiliary Line max flow 90.0 l/min (23.7 gpm) • Centralized, automatic lubrication for turret and boom/stick (excluding pins for quick couplers) • Heated Pneumatic Seat • Side and Rear Camera • Air Conditioning • Travel Speed. Range 1 @ 5 km/hr., Range 2 @ 10 km/hr. • Comes with Pallet forks (to be used with 4 anti-drop safety valves) • 60 months / 3000-hour Comprehensive Warranty. See Dealer for details and warranty extension plans. Mecalac makes a compact class construction equipment that is manufactured in France, Germany, and in Turkey, and distributed throughout North America from their facility in Norfolk, Massachusetts, USA. For more details or information on pricing and payment plans, contact Liftow at 709 754 3012 Check out the entire Mecalac Product Line at: https://www.mecalac.com/en/products.html

The Mecalac 8MCR Crawler Skid Excavator is now available at Liftow, Paradise. With the ability to switch from a compact track loader to an excavator in seconds, as well as having the option to use your pallet forks when needed; The MCR series is 3 machines in 1. Reducing your maintenance costs, insurances, warranty costs, float/transport costs, and fuel consumption MCRs are fast and efficient. You can travel up to 10km/h (6.2mph), which is 2x faster than any small excavator. Considering all the time spent by small excavators traveling across the jobsite, this translates automatically into shorter cycle times, and less non added-value moments for co-workers waiting for the excavator to arrive. Operating Modes: Excavator Mode enables the machine to be operated like an excavator: - Upperframe and dipperstick control with the left joystick - Bucket and intermediate boom or boom control with the right joystick - Traveling control using the foot pedals Compact Loader Mode enables the machine to be operated like a tracked compact loader: - Traveling and counter rotation with the left joystick - Lifting (intermediate boom) and bucket control with the right joystick - Swing “recovery” capability withy the left joystick The 8MCR comes with 3 x Attachments: Excavator Bucket / Skid Bucket /Pallet Forks Comprehensive Warranty of 60 months or 3000 hours, whichever occurs first. Extended options available up to 10,000 hours. See your Liftow Dealer for warranty conditions. Contact Liftow for further enquiries at 709 754 3012 Mecalac makes a compact class construction equipment that is manufactured in France, Germany, the UK and in Turkey, and distributed from their facility in Norfolk, Massachusetts, USA. Check out the entire Mecalac Product Line at: https://www.mecalac.com/en/products.html