Mon, Jul 16, 11:38 AM
cbs, Avalon Peninsula
both are new and off a115 hp yamaha no emails pls
Sun, Jul 15, 3:56 PM
Harbour Breton, Central/Interior
For sale 2010 90 Evinrude etec..No major issues..Not sure number off hours..As
you can see the stickers are just about gone.but you can buy a sticker kit
online. Everything in the pictures is included.. even has handle..
Sun, Jul 15, 2:39 PM
Conception Bay South, Avalon Peninsula
For sale 1 outboard motor 30 hp mariner in good condition needs a new inner rod
for handle assembly can be seen running also one 15 hp suzuki for parts only
motor is shot but all other parts in great condition come pick it up today for
$250.00 want it gone call or text 770-1236 Thanks
Sun, Jul 15, 11:03 AM
Marystown, Burin Peninsula
2015 mercury outboard motor. 25hp long leg with controls and gas tank. Only
used a few times.$4500
Fri, Jul 13, 2:44 PM
Maddox Cove, Avalon Peninsula
1944 Evinrude - no spark, suitable for parts $100
1983 Johnson Colt 1.5hp - engine needa minor repair, starts but runs hot. $200
20hp Evinrude (1980's) - in good working condition $300
35hp Evinrude suitable for parts
15×16 Evinrude v6 tail and stainless steel blades in excellent condition $300
Thu, Jul 12, 4:16 PM
Amazing Prices on The #1 Selling Outboard In Newfoundland, The 70HP Yamaha
Plus Buy Now & Receive 6 Year Recreational Warranty
Call or Email for Special In Store Pricing.
All In Stock Yamaha Outboard Motors On Sale.
F70LA Yamaha Four Stroke Outboard
An advanced powerhead design features a single overhead camshaft (SOHC), yet
with four valves per cylinder, for maximum power and efficiency. Total intake
valve area is increased 17%, while the pistons and valves are up to 10% lighter
(when compared to our T60 model), giving it substantially more
horsepower-per-litre of engine displacement than competitive outboards, both
four stroke and two stroke direct-injected.
LIGHTEST WEIGHT IN CLASS
From the specially designed engine block to the two-piece upper case, every
ounce of weight savings has been realized for maximum performance without
sacrificing durability. Yamaha's new F70 is not only the lightest four stroke
70 horsepower outboard, it's even lighter than competitive two stroke
PRECISE THROTTLE CONTROL
All air entering the engine block of Yamaha's new F70 four stroke is routed
through a single throttle valve, to ensure the precise amount of air necessary
for optimum power and fuel efficiency. It then enters each cylinder through
individual long intake tracks, which are 'pulse tuned' to provide air at the
precise volume and timing for maximum density and power.
MAXIMUM POWER AND EFFICIENCY
Four individual compact electronic fuel injectors deliver the exact amount of
fuel needed for optimum performance and economy. Controlled by the Engine
Control Module via input from an array of on-engine sensors, their location
just above the intake valves enhances fuel atomization, resulting in more
HOLE SHOT AND ACCELERATION
Yamaha's F70 provides outstanding hole shot and acceleration thanks in part to
an advanced sensor that allows maximum safe ignition timing and a gearcase
featuring a high 2.33:1 gear ratio, with specially hardened pinion, forward,
and reverse gears for increased durability.
MORE POWER , CLEANER EMISSIONS
The F70 derives every bit of power available from the fuel by using Vapour
Reduction and Vapour Burning Systems. By eliminating vapour from the fuel rail
and re-routing it back to the Vapour Separator Tank, only fuel is injected in
the cylinders for better combustion and power. A fuel vapour valve prevents
fuel vapours from escaping to the atmosphere when the outboard is not running,
and re-routes fuel vapours through the intake when the outboard is running.
This helps achieve maximum fuel efficiency and minimum emissions.
PROTECTION FROM THE ELEMENTS
The new F70 features a new outer cowling design with an intake air drain
system, to easily and efficiently drain away any water that enters the cowling
during normal engine operation. Incoming air is routed through a labyrinth of
passages that help trap and drain water before it enters the engine's intake,
for maximum reliability.
QUIET, YET STRONG
Yamaha's F70 four stroke outboard utilizes a Long Span Mounting System, which
uses large specially constructed rubber engine mounts placed as far apart
vertically and horizontally as practically possible. Smooth and quiet
operation, yet with strength and durability, is the result.
LARGE WATER SEPARATOR
All-new F70 outboards feature a large, on-engine water separating fuel filter
with a water sensor. Used in conjunction with Yamaha's optional boat-mounted
10-Micron Water Separating Fuel Filter, it helps separate water and
contaminants from the fuel before they can reach the outboard's other filters
and fuel injectors.
Yamaha's large anti-splash plate, standard on F70 models, helps keep water
from splashing up between the leading edge of the outboard and the boat,
resulting in a much dryer ride. Located on the front of the lower mid-section
just above the lower unit, it excels in applications where the outboard is
normally run deep in the water, such as pontoon boats.
PRECISE TROLLING CONTROL
By just pressing a button on the Command Link® tachometer or the VTS - switch
on the optional Multifunction Tiller Handle, the operator can adjust the
engine's trolling speed from 620 ~ 900 rpm in 50-rpm increments. This helps
provide precise and consistent trolling speeds in wide array of conditions.
Optional Command Link gauges offer a wealth of information to the operator in
order to help provide efficient and effective operation. Available in square or
round style to fit a wide range of tastes and applications.
TILLER HANDLE CONVENIENCE
Yamaha's award-winning optional Multifunction Tiller Handle offers the
benefits demanded most in a tiller control. From its front-mounted gear shift
and ignition key switch controls, to the easy-to-use Variable Trolling RPM
Switch, it's ergonomically designed to provide maximum control with maximum
SMOOTH AND QUIET
Engine exhaust is routed through a maze before exiting above the waterline
through the idle exhaust relief outlet for unbelievably smooth and quiet
Thu, Jul 12, 3:57 PM
St. Anthony, Northern Peninsula
Evinrude 115 E-tec. Rigging and HST Extra. Call 709-454-3383 for more info.
Wed, Jul 11, 3:00 PM
grand falls windsor, Central/Interior
Tiller handle, complete with controls and keys. Handle will fit a 2004 Suzuki
50hp, 4 stroke. Call 489-5304
Tue, Jul 10, 7:30 PM
Burgeo, West Coast
ALL PARTS IN EXCELLENT CONDITION
Tue, Jul 10, 7:25 PM
ramea nl, West Coast
lower gear unit for 40 hp mariner marthon 1995
Tue, Jul 10, 12:41 AM
DROP BY BUDGELLS SPORTS AND MARINE FOR YOUR COASTAL BOAT BEFORE THE 2018 SUMMER
SAVE UP TO $$$$$$11,000.00
This is a "NEW" 2018 198 WT Coastal Boat With 115 HP EVINRUDE ETEC Engine and
SO HURRY IN FOR YOUR CHANCE TO SAVE THOUSANDS!!!!
NOMINAL DEPOSIT REQUIRED
Mon, Jul 9, 11:14 PM
Goulds, Avalon Peninsula
20hp Chrysler outboard engine with tank and hose
runs good recently had tune up spark plugs/carburetor
Mon, Jul 9, 11:56 AM
Kelligrews, Avalon Peninsula
I bought this not knowing it was a long shaft until I put it on my aluminum
boat. It works/runs good and is in good condition with a few scratches on the
hood. I don’t know the exact year but it’s a 70’s model according to the serial
#. Will sell or trade for a short shaft.
Sun, Jul 8, 10:24 PM
2013, 15Hp, APS 4Stroke short shaft. Excellent condition, only used in fresh
Gas tank,hose, manual, 2new sparkplugs and oil filter included.
Reason for selling: New boat required longshaft motor.
Sun, Jul 8, 7:33 PM
Swift Current, Burin Peninsula
4.3 Mercruise engine. Lost fire. Controls and cables. Alpha 1 Stern drive.
Parts for a 4.3 Yahama outboard motor.
For more info please call 549-2152 or 427-2172
Sat, Jul 7, 3:05 PM
Northern Bay, Avalon Peninsula
Parting out a 1983 mercury 50 hp with electric start
Sat, Jul 7, 9:04 AM
St. Anthony, Northern Peninsula
Message what you have. Thanks
Fri, Jul 6, 4:59 PM
This is a new motor comes with all documentation and warranty was purchased but
never used its a9.9 four stroke short shaft mercury motor
Fri, Jul 6, 8:18 AM
gander bay, Central/Interior
Selling a new never used Propeller and hub assembly to fit Mercury/Mariner, 60
HP Bigfoot, 70-90 HP 3 Cyl,100-125 4 Cyl, 135-250 HP 6 Cyl, Force 90 thru 120 3
& 4 Cyl, MerCruiser Alpha and Bravo One (less than 400 HP). This propeller and
hub assembly was never used, has it was kept has a spare. The propeller is
Thu, Jul 5, 7:58 PM
B Bay, Eastern
For sale Propeller to fit Honda OBM 75--HP---90 HP ---115 HP---OR 130 HP TEL