• Rust Repair Panels, Bumpers, Hoods and more!!!
    Bob's Fender Shop has been supplying Commercial and Residential customers with high-quality parts for over 30 years! If you're fixing up your car after a collision, or if you're restoring your classic car, we've got the parts you need! We stock lots of RUST REPAIR PANELS because we know that in Newfoundland rust is a problem. Don't let rust ruin your vehicle, call Bob's Fender Shop at (709) 368-7038 today for Rust Repair Panels and stop the rust before it stops you! Need to fix a rusty panel on your Silverado, RAM, F-150 or Sierra? We've got what you need for most makes and models: * Rocker Panels * Cab Corners * Rear Wheel Patch Panels * and more! Restoring your Classic or Muscle Car back to it's glory days? We have the parts you need for that too: * Full Car Bodies * Carpet * Sheet Metal * Weather Strips * One-Piece Floor Pans * Wheels * and everything else! If you need CAPA certified parts which meet or exceed OEM standards, but are just a fraction of the cost, call Bob's Fender Shop at (709) 368-7038 today! We carry: * Headlights * Bumpers * Fenders * Grills * Hoods * Bumper Covers * Radiators * Condensers * and more! We also custom-order car and truck accessories such as: * Hood Deflectors * Vent Shades * LED Lights * Leveling Kits * Weather Tech Floor Mats * Jeep Accessories * Wheels * and anything else you need! If you're not sure what you need, just call us at (709) 368-7038 or drop into our location in Mount Pearl,, just off of Park Ave. Gary Ford has been running the shop for years, dealing with suppliers to bring customers what they need, so he can help you out.Bob Ford has decades of experience restoring classic and muscle cars so if you're restoring a car and aren't sure what you need - don't worry because Bob knows! What else? We also carry tires! So make us your one-stop-shop and let us take care of you, so you can take care of your vehicle! Call 709-368-7038 , or visit us at: Bob's Fender Shop 5A Riverview Ave, Mount Pearl A1L 1N9 If you need help finding us, below is a map. You can also click this link to bring up an interactive map on your computer or phone:
      Mount Pearl, Avalon Peninsula
  • $700
    Tue, May 21, 9:19 AM
    Cupids, Avalon Peninsula
    350 Chevy Engine. Fits years 68-79 Stand included. $700 ono
  • $300
    Mon, Apr 22, 9:36 AM
    Corner Brook, West Coast
    GM 350 engine parts: 2 Cylinder heads complete $100, 4 BBL intake manifold $80, 2 exhaust manifolds $80 , water pump with pulley $30, fuel pump $10 , electronic distributer $50, alternator $30, p/s pump with pulleys $30 . Take all for $200. Parts have been sitting awhile , will need to be checked and cleaned.
  • Wed, Apr 3, 5:14 PM
    arnolds cove, Avalon Peninsula
    Looking for a turbo 350 transmission or one to rebuild thanks henry
  • $100
    Fri, May 24, 8:13 AM
    Bellevue Beach, Avalon Peninsula
    Water 455 Pontiac Engine
  • Mon, May 13, 8:25 PM
    paradise, Avalon Peninsula
    Wanted 4.7 engine for 2003 to 2009 dodge ram.
  • $500
    Mon, May 27, 11:00 AM
    Clarke's Beach, Avalon Peninsula
    4.3l engine and transmission out of a 2002 gmc sonoma. Has 165000km comes with radiator. Wiring harness on the engine has been cut everything else is there. Ecm has been flashed. Has new oil cooler lines.
  • $200
    Mon, Apr 8, 2:08 PM
    Flatrock, Avalon Peninsula
    Selling a GM 4.3 V6 Engine from 1999 GMC. Purchased truck for parts don't need engine. Drove it home from CBS no issues & no dash lights on. You remove save yourself some money. Good engine for replacement or Rod. Available if your reading or text for more information (709)641-0327.
  • Sun, Apr 28, 7:24 PM
    Makinsons, Avalon Peninsula
    Looking to buy running 350/400 sbc drop in ready, would prefer fully dressed but not required.
  • $120
    Tue, May 7, 2:48 PM
    Portugal Cove - St. Philip's, Avalon Peninsula
    Spectra Premium GMP01A engine oil pan, new in box. Made in Canada Material: Cold Rolled Steel (EDDQ); Height: 7-3/8 in.; Drain Plug Thread: M14 X 1.5 For 2.8L (173cid) and 3.1L V6 (189cid) motors used in various Buick, Cadillac, Chevrolet, Oldsmobile and Pontiac models between 1987 and 1995. "If you are viewing this listing, the item(s) is/are still available."
  • $350firm
    Wed, Apr 10, 3:34 PM
    Cobbs arm, Central/Interior
    I have a 02 honda accord engine 2.3l vtec fully rebuilt with all new parts . Spent well over 800 in parts while doing the build , but lost interest in the car so the engines been just sitting on the engine stand waiting to go in a car . However its in the way now and i have no desire to do anything with it anymore , i know ill never get my money back i spent in it but I thought id give it a shot and try to get something for all the parts and labor i put in it . The engine has : new crank bearings and rod bearings (all assembled with assembly grease) , new oil pump, new coolant tube , new timing belt, and tensioner and other components, new gaskets /o rings top end to bottom end , new vailve seals , new timing plates for the 3 rd (vtec) valve… ect … I can just keep listening new parts , this engine is basically brand new , done completely top to bottom i also had the block owned to . 350 bucks and shes yours , i am negotiable but considering everything i think that’s pretty good , pics can be available as well upon request . Thanks
  • $40
    Tue, May 7, 9:41 PM
    conception bay south, Eastern
    OEM GM 12612350Base pan gasket for a Chevrolet LS series engine. Fits many years/models. Please check yours by searching part number.$40 thanks
  • Sat, May 11, 9:57 PM
    Placentia, Avalon Peninsula
    looking for an engine for a 2014 f150 with the 3.5 ecoboost
  • $175obo
    Sat, Apr 13, 1:24 PM
    Durrell,NL, Central/Interior
    REDUCED to $175—FOR SALE A 1989 HONDA ACCORD Engine That I Bought As A SPARE After The Car Was Totalled. It Had 125,580 km At time Of Accident. Everything Was Working Perfectly. It Is A Four Cylinder Motor. The. Engine Has Been Stored With Oil in The Cylinders And Pistons Are Moving Freely. Also Includes Transmission, FUEL Pump And POWER STEERING Pump. Asking $225 ono. REDUCED to $175—If Interested, Please Call Phil, Text Or Email Phil At 709-385-6353
  • Tue, May 7, 8:38 AM
    St.John's, Avalon Peninsula
    Wanted 5.3 Litre Vortex Engine to replace engine in 2004 Chev Avalanche.
  • $500
    Thu, Apr 25, 10:10 PM
    Birchy Bay, Central/Interior
    Selling a 05 5.4 Ford engine with 140,000 on it, bought it for my old truck but didn't need it so only in the way now, $500 ono
  • $250
    Mon, May 6, 10:14 PM
    Clarenville, Eastern
    These 2 rear rotors fit ford excursion 2000-2005 Ford f 250/350/450 super duty 1999-2004 They the 14.5. Has the abs ring. Brand new in box
  • $200neg
    Fri, Apr 19, 10:59 AM
    Tilton, Avalon Peninsula
    4.8 liter v8 for chev or gm
  • $45
    Thu, May 2, 8:11 AM
    gander, Central/Interior
    $45 per jug. I have 2 jugs. I bought the wrong oil.
  • Sat, May 4, 9:48 AM
    Chapel's cove, Eastern
    Transfer case 07 Chevy Colorado 350$.120000km on vehicle.
  • $150
    Thu, May 2, 12:23 PM
    Boyd's Cove, Central/Interior
    New rotors and brake pads purchased for a 1989 motor home but didn’t need them. Will fit 1976-1994 E-350 or F-350