• $350.00obo
    Fri, Jul 20, 6:15 PM
    Blaketown, Avalon Peninsula
    Counter clockwise rotating lower unit and stainless like new 14x19 counter rotating propeller. Lower unit will fit Johnson Evinrude engines from 135 hp to 250 hp for model years from 1991 to 2001. This lower unit only needs a new water impeller kit plus fresh gear oil.
  • $75.00neg
    Fri, Jul 20, 9:16 AM
    South branch, West Coast
    New unused 10-1/2X9RH Michigan Wheel Vortex 3-blade Aluminum Propeller High performance aluminum design Performs well on outboards and inflatables Gloss black powder coat finish 3-1/4" gearcase, thru-hub exhaust Requires XHS hub kit for installation Part # 992501 Hub kit is not included Fits:  EVINRUDE/JOHNSON 15 HP E-Tec H.O. 2011 & Newer 20 HP 2 Cyl….1984-97 25 HP 2 & 3 Cyl….1984 & Newer 25 HP Commercial….1993 & Newer 35 HP 2 Cyl….1979-1983 35 HP 3 Cyl….1997-2001 30 HP E-Tec  2009 & Newer 30 HP 2 Cyl….1984 & Newer   FORCE, CHRYSLER, US MARINE 25 HP 3 Cyl….1995-98   HONDA BF25….1994 & Newer BF30….1995 & Newer   MERCURY / MARINER 9.9, 15 HP (4-Stroke, Bigfoot / Sail)….1999 - 2005 20 HP (Mercury)….1986 -2002 25 HP (2-Stroke Mariner)….1985 & Newer 18 HP (Mercury)….1980-85 25 HP (2-Stroke Mercury)….1980 & 2005 25 HP (Sea Pro/Marathon)….All Years   MERCURY 25 HP (4-stroke - Not Bigfoot)….2006 & Newer 30 HP (4-stroke - Not Bigfoot)….2006 & Newer   NISSAN, TOHATSU 25 HP….1986 - 2001 25 HP (4-stroke)….2002 & Newer 30 HP….1985 & 2001 30 HP (4-stroke)….2002 & Newer     SUZUKI DT 20 & 25 HP 1987-88 DT 20 & 25 HP 1985-86 (use stopper OEM 57632-96400 (for rubber hub propellers only) DT 25C….1989 - 2000 DT 30, 30C….1987-97 DF 25 (4-Stroke)….2000 - 2006 DF 25 V-twin 2006+ DT 30 ....1987-97 DT 30 ....1983-86  (use stopper OEM 57632-96400 (for rubber hub propellers only) DT 30C 1987-1997 DF 30 (4-Stroke)….2000-2007   YAMAHA 20HP….1996-97 25 HP….1980 & Newer F25 (4-stroke)….1998-2006; 2010 & Newer 30 HP….1979-2002
  • Thu, Jul 19, 1:35 PM
    Paradise, Avalon Peninsula
    Outboard motor parts for sale. Some used and some new. Good Variety - Mostly Evenrude, Johnson, Mariner, Chrysler and Mercury. Phone calls only.  Call Dave at 773-0920 or 689-5433
  • $75.00firm
    Thu, Jul 19, 8:37 AM
    cbs, Avalon Peninsula
    1950s viking engine for parts. I believe it's a three hp. $75
  • $100.00
    Wed, Jul 18, 7:37 PM
    Glenwood, Eastern
    I have for sale one set of props that came off a Yamaha 150 four stroke.I bought them but they were the wrong ones for my boat and there is a little nick on one of the blades.Blade is in good shape besides that and there are no bends.The pitch on the blade is 14.8 x 17
  • $85.00
    Wed, Jul 18, 8:12 AM
    bishop's falls, Central/Interior
    Honda propeller, 9 1/4 x 12, in good shape
  • $100.00
    Wed, Jul 18, 12:32 AM
    Lewisporte, Central/Interior
    2 fiber glass doors with mounting hardware. One 20"x27" 2nd 32 1/2"x 19 3/4" $100 for both.
  • Mon, Jul 16, 2:24 PM
    Roaches Line, Avalon Peninsula
    Mercruiser parts for sale or trade for a 20 horsepower kicker outboard. Call 683-0813
  • Sun, Jul 15, 7:24 PM
    South branch, West Coast
    Looking for a prop to fit a 115 hp Mariner. The type that requires a hub. Mint condition not required. Going to be used crossing a very shallow sandbar. It will be getting dinged. 13”x19 or 12 3/4” x
  • $12,346.00
    Sun, Jul 15, 1:39 PM
    arnolds cove, Avalon Peninsula
    Wanted parts for 40 Hp mercury 2 stroke outboard motor sea pro on hood
  • $450.00
    Sun, Jul 15, 9:27 AM
    little bay, Burin Peninsula
    like new honda outboard controls cables and gauges
  • $350.00
    Thu, Jul 12, 8:35 PM
    trinity bay, Avalon Peninsula
    sails for a g L marine, minuet sail boat, cost 900 new, selling for 350,excellent condition.
  • $200.00neg
    Thu, Jul 12, 7:23 PM
    st John's, Avalon Peninsula
    Two rope Anchor for sale weights about 80 lb never used
  • Thu, Jul 12, 7:12 PM
    Bishops Falls, Central/Interior
    I am selling a set of controls to fit a Johnson/envinrude engine.the controls are in excellent condition.brand new ignition all the wires are their for the electric primer,electric start,and power trim.includes 2 sets of cables one set is longer.$200 firm.these controls will fit any size engine.
  • $200.00
    Thu, Jul 12, 7:12 PM
    Bishops Falls, Central/Interior
    I am selling a lower end unit (gear box) for a 50 hp Johnson.this lower end is ready to bolt on had it completely rebuilt at Gillingham’s last summer gears replaced,all new seals and new gear oil.this unit hasn’t been used since it was fixed last year $200 firm.This unit will fit other models as well 40 ,50 and 60 hp models.you can contact me at 709-486-3561 I also have 3 shafts,a complete set of gears and 2 props to go with it.
  • $10.00
    Tue, Jul 10, 6:14 PM
    Eastport, Central/Interior
    I have a box of 100 boat rollers. Was purchased by a family member who had a fishing license but has recently sold out. The rollers are brand new. they measure 4.5"H - 3"w - center hole is 1". Asking $10 each. will sell all for package deal.
  • $60.00
    Fri, Jul 6, 6:27 PM
    Cbs, Avalon Peninsula
    For sale a prop for a older style evinrude/Johnson outboard 12 1/4 x15 paid 200.00 for it very little use
  • $80.00
    Fri, Jul 6, 9:32 AM
    Gander, Central/Interior
    bought for my 1999 90 hp mercury a power trim and tilt motor tilt switch ,new never used.paid $140 asking $80
  • $180.00
    Thu, Jul 5, 7:18 PM
    deer lake, West Coast
    Prop to fit 180 seadoo challenger
  • Thu, Jul 5, 8:43 AM
    Gambo, Central/Interior
    Looking for a lower unit for a 2002 115 Johnson outboard 4 stroke or Suzuki 4 stroke is the same. I'm not getting e-mails from this site for some reason. Please call