Wed, Dec 11, 6:59 PM
Paradise, Avalon Peninsula
All of my items come from a clean, smoke free home.
2009 Transformers "Revenge of the Fallen" full, flat bed sheet. Measures 79" x
92". Very nice, clean & pressed, slightly used condition. Nice size bed sheet,
or use it as a great piece of fabric.
Check out my other Ads
Wed, Dec 11, 11:27 AM
Tractor + Loader: $21,199(plus t/l), or $83 Biweekly/240 Months (t/l incl.)
Tractor + Loader + Cab: $27,699(plus t/l), or $108 Biweekly/240 Months (t/l
Tractor + Loader + Backhoe: $30,198(plus t/l), or $118 Biweekly/240 Months
Tractor + Loader + Cab + Backhoe: $36,698(plus t/l), or $142 Biweekly/240
Months (t/l incl.)
Tractor + Loader + Cab + Front Blower: $34,698 (plus t/l), or $135
Biweekly/240 Months (t/l incl.)
Tractor + Loader + Rear Blower: $24,598 (plus t/l), or $96 Biweekly/240 Months
Tractor + Loader + Cab + Rear Blower: $31,098(plus t/l), or $121 Biweekly/240
Months (t/l incl.)The T234 might look like a sub-compact tractor, but it sure
doesn’t act like one. With lift capacities that exceed those of some larger
tractors, the T234 lets you take care of jobs both large and small.
Misubishi Tier 4 Engine: The Mitsubishi contains 3 cylinders and allows for a
reliable, powerful, and fuel efficient operating experience.
The T234’s superior quality front axle delivers an extremely tight turning
radius with full power transfer to the wheels at every steering angle.
The Hydrostatic transmission, with 2 range speed controls, provides a
comfortable and easy forward and reverse motion.
The T234’s Category 1 3-Point hitch has a lifting capacity of 1,534 lbs,
allowing for a wide variety of implements.
The T234’s hydraulic power steering makes turning easier with improved
controls, reducing your operating fatigue and allowing for more hours on the
Front-End Loader Joystick Valve: Allows you to perform all loader function
with joystick lever.
The PTO switch is conveniently located on the dashboard, allowing for a simple
push and turn to start the independent rear PTO and a single push thereafter to
With a full flat deck and brakes on the left hand side, the T234 provides more
leg room and less clutter for the operator.
The T234 ROPS can be stored easily into low clearance buildings or sheds with
our foldable ROPs design.
Added filter protects the engine from harmful particles and drastically
extends average engine life.
The T234 sports a 6.6 gallon large capacity fuel tank for long operational
The T234 comes with the option of a fully heated cabin for those cold winter
With the press of a easy access lever, you can quickly and easily open your
hood for daily service and maintenance checks.
Engine Manufacturer: Mitsubishi
Engine Model: S3L2
Engine Type: Natural Aspiration
Engine HP - Gross: 24.4 (18.2)
PTO HP(kw): 18.3 (13.6)
Rated Engine Speed: 2500
Number of Cylinders: 3
Displacement - cu.in. (cc): 80.4 (1318)
Air Cleaner: Dual Dry
Fuel System Type: Indirect Fuel Injection
Transmission Type: HST
Number of speeds: Infinite / 2 Range
Max Traveling Speed, mph(km/h): 9.6 (15.5)
Brakes: Wet Disc
Pump Type: Dual Gear Pump
Implement Pump Cap, gpm(L/min): 4.4 (16.6)
Steering Pump Cap, gpm(L/min): 2.3 (8.8)
Max Total Flow, gpm(L/min): 6.7 (25.4)
Category, 3 Point Hitch: I
Hitch Lift Capacity, lb. (kg): 1534 (700)
at 24 inches behind link ends, lb(kg): 1102 (500)
Lift Control Type: Position
Joy Stick Valve: Standard
No. of standard remote valves: 1
PTO Type: Independent
PTO Control: Electric/Hydro
PTO Mid (rpm): 2000
PTO Rear (rpm): 540
PTO Shaft Diameter in. (mm): 1 3/8 (35)
Fuel Tank, US gal. (L): 6.6 (25)
Cooling System US qt. (L): 5.9 (5.6)
Crankcase (with filter) US qt. (L): 4.5 (4.3)
Trans & Hydr. System US gal (L): 5.8 (17)
Front Axle qt (L): 4.7 (4.5)
Overall Length, in (mm) with 3P: 107.8 (2740)
Overall Width, in (mm): 52.8 (1342)
Height to top of ROPs, in (mm): 89.9 (2280)
Min Ground Clearance, in (mm): 7.71 (196)
Min. Turn Radius, in (mm) with Brakes: 98.5 (2502)
Min. Turn Radius, in (mm) w/o Brakes: 105.5 (2682)
Total Weight w/ ROPS lb (kg): 1907 (865)
Mitsubishi 3-Cylinder Diesel Engine
2-Range HST Transmission
1,534 lb Hitch Lift Capacity
Optional Loader: 1,380 lb Capacity
Heated Cab Available
Images may show optional equipment.
Tue, Dec 10, 3:06 PM
Goulds, Avalon Peninsula
ISLAND WIDE shipping. Direct Bolt In. Call or email for pricing on F250 and
F350. Driveshafts at affordable prices using state of the art equipment. Drive
line machine shop specializes in new and remanufactured driveshafts for most
domestic vehicles, heavy equipment, trucks, autos, hot rods, race cars, 4 x
4's, boats, printing presses, industrial equipment and custom applications. All
of our driveshafts are made with high quality parts that meet or exceed OEM
tolerances, and are high speed balanced on one of our worlds most accurate
We also re-manufacture steering shafts for common cars and trucks.
Call for details and price. Open 7:00am to 5:00pm (5 days a week).
Tue, Dec 10, 10:26 AM
St. John's, Avalon Peninsula
Heavy Duty Mastercraft 12" Bench Drill Press with 6 amp motor and 12 speed
settings from 280 to 3000 rpm. Model no. 55-5929-2. Used only for hobby work
and in new condition. Reliable and accurate. Asking $275. Also have 6" drill
press clamp for $20 and Silver and Deming Titanium drill bit set 9/16, 5/8,
3/4, 7/8 and 1" for $40. All in perfect condition. Will sell all 3 items for
$300. Call 709 753 4034 or 709 727 8419.
Mon, Dec 9, 8:58 PM
St johns, Avalon Peninsula
Mon, Dec 9, 8:09 PM
St. Johns, Eastern
Ball joint press. Used once, and no use for it now. $80 o.b.o.
Fri, Dec 6, 11:20 PM
St. John's, NL, Avalon Peninsula
For Sale a Power Fist (Princesses Auto) drill press roller stand. Too large for
my bench top drill press. Excellent condition. Asking $35.00
Thu, Dec 5, 11:23 PM
Grand falls-Windsor, Central/Interior
for sale 9 1/2 inch cast iron bacon press in nice condition , message me if
Thu, Dec 5, 12:49 PM
wings point, Central/Interior
.5 hp Hydraulic power supply cw hyd tank and control valve and hoses.. ideal
for small hyd press
Tue, Dec 3, 8:45 PM
Western Bay, Avalon Peninsula
Looking for a T shirt heat press
Mon, Dec 2, 11:54 AM
carbonear, Avalon Peninsula
deluxe cookie king crank type cookie press spritz gun perfect shape think it
from the 50s or 60s
Mon, Dec 2, 9:05 AM
Marystown, Burin Peninsula
1999 Polaris 600 XC high performance,l/c,case reed,2-stroke twin. Sled is all
stock (except for brand new 6 1/4” wide C&A Pro skies with new 6” carbide
runners that cost me over $800)and only has 2294 original miles.Sled does not
have e-start or rev. She was built light weight for two things only...SPEED and
QUICK MANEUVERING.Never modified,or abused and very well taken care of. Always
covered and stored in garage when not being used.I’m the 2nd owner of this
machine and the original owner babied her just like I have.Sled is quick and
fast and really needs to go to a seasoned rider.I replaced the bearings in the
skid wheels last year,not because they needed to be replaced but just because I
wanted her to be perfect.She is in near mint condition.You will be hard pressed
to find a 1999 600XC in better shape.
No trades. Sell only.
Sat, Nov 30, 12:30 PM
Portugal Cove-St Philips, Eastern
PropertyGuys.com is proud to bring you 26 Anglican Cemetery Road, in scenic
Portugal Cove-St. Philips.
This cozy 3-bedroom, 1.5 bath home is located on an oversized private lot and
features ocean views. The home has basically been renovated from the studs up
over the last few years with quality work and attention to detail that is hard
to match. The main floor features an open concept kitchen and living area, 3
bedrooms and main bath. You also have access to the large patio that
encompasses the entire front of the home and down one side. The lower level
welcomes you with a large foyer/laundry room and tons of built in storage along
with a half bath, storage and a large rec room, perfect for hanging out with
the family and watching a movie or family game night. Also located on the
property is a large 2 bay garage that is wired and heated with a forced air oil
furnace, an additional single car garage, a storage shed and fenced in dog run
and plenty of parking. You will be hard pressed to find the privacy and quality
this home provides this close to the city. Call today to schedule your private
26 Anglican Cemetery Rd, Portugal Cove-St. Philips, NL
PropertyGuys.com Sign # 257049
1 partial baths
Fri, Nov 29, 7:37 AM
Dildo, Avalon Peninsula
Picking up a new hobby, looking for old print shop items, letter presses and
supplies, clam shells, cutters, etc. Let me know what u have and what u want
for it and maybe we can make a deal.
FWIW: I have no in depth knowledge, just something I think would be interested
to learn an old trade to pass along to younger generations.
Thu, Nov 28, 2:51 PM
Corner Brook, West Coast
Cricut easy press 2 size 9x9 with mat. Brand new, never taken out of the box.
Had to take a break from crafting but already had this ordered. Figured I’d try
selling it before the hassle of trying to return from buying off of the US
Sat, Nov 23, 2:10 PM
Paradise, NL, Avalon Peninsula
FOR SALE: - One SINGER Magic Steam Press 7 Iron Unit. Get professional results
in half the time; Reduce your ironing time by 50-Percent; Extra-Large Pressing
Surface that is 10 times the pressing surface as a conventional iron; Accurate
Electronic Fabric Temperature Settings ... This Is One Great Press Unit, And
Indeed Does Save A Lot Of Time... For Further Details On This Unit, Please Call
Elizabeth At 834-8850 Or Text At 727-2899...
Thu, Nov 21, 9:00 AM
grand falls -windsor, Central/Interior
FOR SALE IS A PRESS WITH NUMBERS FOR MARKING LIDS ON LOBSTER CANS BACK IN THE
DAY WHEN THEY USED TO CAN LOBSTERS . MADE IN ENGLAND WORKS GREAT
Tue, Nov 19, 8:01 AM
harbour grace, Avalon Peninsula
DILLION 550 PROGRESIVE PRESS TWO HOPPERS DIGITAL SCALES CASING LATHE CASE
GUAGES 5 COMPLETE SETS OF DIES AND MORE
Sun, Nov 17, 3:36 PM
St John's, Avalon Peninsula
Airport heights pickup preferred.
Sat, Nov 16, 9:35 AM
Mount Pearl, Avalon Peninsula
Here's a tool nobody should be without. Never get frustrated trying to get an
accurate measurement again!
The Bosch BLAZE GLM 20 laser measure is an easier, faster and more accurate
way to measure. It delivers laser precision technology and real-time
measurement mode, taking instant and reliable measurements up to 65 Ft., so one
person can size up the job in seconds. Square and compact by design, the BLAZE
GLM 20 laser measure is ready for anywhere portability. It has a backlit
display for easy viewing, even in dark areas. The laser measure is simple to
operate, so users need only press one button to get accurate measurements to
within 1/8 In., and press again to hold the measurement.
This unit is absolutely brand new and currently sells for $78.20 after taxes
at Amazon and Home Depot. Save yourself 30% here!
The price is firm and if you see this ad, the tool is still available...