Thu, Jan 17, 1:19 PM
Bay Roberts, Eastern
Beautiful home located in the mature and highly sought after Coley`s Point area
of Bay Roberts in only a few minutes walk to amenities such as schools and
shopping. This home features 4 bedrooms, 3 bathrooms including an ensuite off
the master bedroom with whirlpool tub, there is a sun tunnel installed in the
main bathroom for natural lighting and energy efficiency. Open concept -
kitchen, living and dining room area. Basement features built in garage, family
room, laundry/bathroom and 4th bedroom, a Heat Recovery Ventilation System,
beautiful set of stained Oak Cabinets with center Island and the owner is
including all appliances including built in dishwasher and Microwave, fridge,
range, washer and dryer. Easy access to the private patio deck off the dining
room, convenient electric heating, beautiful laminate floors, paved driveway,
fully landscaped lot.
Call Frank Evely at 683-5255
Wed, Dec 12, 9:22 AM
Hampton jct, West Coast
Fully furnished 2 bed cabin for sale on beautiful Sandy Lake, 1.4 km off the
TCH, located 13A camp 71 Road, lot size 150 x 300
- Many upgrades over the last 3 years.
- Great view with a lot of wildlife activity and many ATV and Skidoo trails
- Generator and 3 sheds.
- Propane, stove, and water heating system.
Sun, Jan 6, 11:32 AM
Broad Cove Cbn, Avalon Peninsula
House for sale in the beautiful town of Broad cove cbn, this newly renovated 3
bed room 1.5 bath home has all new dry wall, upgraded 200 amp electrical
service, all new flooring throughout, new custom cabinets, all new windows and
doors, siding, new hot water boiler, patio, septic system, up to date
survey...approximately 15 minutes from Carbonear and Northern bay sands
...asking $169000 Neg , come take a look and try a offer
Call or txt 7095971554
# cbn small point/broad cove/black head Adams cove bdv
Sun, Jan 13, 9:16 PM
Are you looking for the perfect getaway; a place to relax and watch a beautiful
sunset? Well, look no further! It’s located between Botwood and Point
Leamington; 7 kilometers off the highway on Glenn Peyton’s access road. It’s
for sale, today! Recently, a new road to the cabin was constructed. During the
winter months, the cabin is accessible by ski-doo only. The cabin was built,
approximately, 10 years ago with all new materials. It has Cape Cod siding. It
is 20' x 30' with a 6' x 8' porch. It’s surrounded on three sides by water. You
can sit back on the front veranda, which is the full length of the cabin, and
enjoy the scenery overlooking Trout Lake. The cabin is being offered with
contents, which includes a new propane range and generator. It’s heated by a
wood stove and features open concept kitchen/living room, 2 bedrooms with
laminate flooring, bathroom, birch cabinets, inside doors are solid knotty
pine. The septic system is not in place yet. In the summer, the lake provides a
great place for boating, canoeing, fishing and swimming. Also, it’s a good area
for berry picking. In the winter, it’s an excellent location for hunting, ice
fishing and ski-dooing (easy access to groomed trails).
Fri, Jan 18, 2:06 PM
Harbour Grace, Avalon Peninsula
SAVE $2300 On A New 2017 Yamaha YZ450F Dirtbike
FINANCE FOR AS LOW AS 4.49% UP TO 60 MONTHS
2017 Yamaha YZ450F
SALE: $7499.00 (Plus Freight/PDI, Tax, Licence)
Contact Ken or Michael for more details
596-5957 or 596-5971
* Revolutionary reversed engine design with front mounted FI system & rear
* Mass centralizing rearward-slanted-cylinder helps keeps weight centred in
* Launch Control System
* "Battery-less" 44mm throttle body FI & easy access airbox
* Compact aluminum Bilateral Beam frame & aluminum swingarm
* Industry-leading, fully adjustable KYB® "SSS" fork & Monocross rear
* Large 270 mm front disc brake & twin piston caliper
* GYTR® Power Tuner ReadyENGINE
* Design goals for the YZ450F are a balance of easy cornering, a lightweight
& compact feeling due to excellent mass centralization and a deep power band
tuned for excellent "ride-ability & controllability".
* "Reversed" liquid-cooled, 450cc, DOHC, 4-valve (titanium), 4-stroke, single
with fuel injection.
* Rearward slanted, reversed cylinder design.
* rearward slant moves a significant amount of rotating weight toward the
centre of the chassis
* rearward slanted design centralizes mass for excellent handling & a light
* "Reversed" engine design (FI system is front mounted, exhaust exits from
rear of cylinder).
* FI throttle body & air box are front mounted, providing a straight intake
* straight intake path into the cylinder, provides optimum fuel/ air flow for
* front mounted intake keeps fuel cooler since engine heat has less effect on
incoming fuel (cooler fuel is more dense & increases power)
* design centralizes mass for light, agile handling
* Compact 4-valve cylinder head features a 12.5:1 compression ratio.
* 37 mm titanium intake valves & 30.5 mm titanium exhaust valves
* 4-valve design offers optimum flow for excellent power & torque
* compact combustion chamber design
* Lightweight, hollow intake & exhaust cams
* excellent power & controllability in the low to mid rpm range
* strong high rpm power
* Lightweight titanium valves use load-reduced oval valve springs.
* titanium reduces reciprocating weight & allows for a higher rpm limit (40%
lighter than steel valves)
* reduced friction (load reduced) valve springs
* Automatic cam chain tensioner.
* reduces maintenance & mechanical engine noise
* special cam chain "sliders" reduce internal frictional losses.
* Lightweight, ceramic composite plated aluminum cylinder.
* reduced weight... no sleeve or heavy liner... plating is sprayed directly
on the aluminum block
* ceramic coating insures faster, more uniform heat dissipation
* coating enhances the thin film of oil between the cylinder & piston,
reducing friction & increasing power
* Cylinder is "offset" relative to the crankshaft (to exhaust side)
* reduces frictional losses between piston & cylinder wall during the power
* Cylinder "cutaways" allow air "trapped" under the piston to enter a side
chamber (or cutaway).
* reduces horsepower-robbing "pumping losses"
* Crankcase also utilizes special "cutaways"
* reduces horsepower-robbing "pumping losses"
* crankcase cutaways match cylinder cutaways for maximum efficiency
* Lightweight, short-skirt, forged aluminum piston.
* lightweight design means faster throttle response
* reduced mechanical vibration for excellent durability
* special coating on piston skirt reduces friction
* Piston oil cooler jet nozzle directs oil to the cylinder, rod & underside
* reduces piston, cylinder & rod temperatures for excellent durability
* Carburized (type of heat treatment) connecting rod for excellent durability.
* Lightweight gear driven balancer shaft.
* reduces vibration for improved rider comfort & reduces rider fatigue
* 5-speed transmission utilizes a 2-bar, floating shift guide system & a 14
mm shift shaft.
* smooth, positive shifts
* good durability in the event of a crash (14 mm shift shaft)
* see spec page for gear ratios
* Heavy duty, multi-plate, clutch with quick access magnesium outer cover.
* quick access outer cover provides fast & easy clutch access
* light lever pull for reduced hand fatigue
* 44mm Keihin throttle body fuel injection system.
* 12-hole injector
* maximizes fuel atomization for more complete combustion & excellent power
* FI benefits include automatic adjustments to insure the optimum fuel - air
ratio regardless of outside air temperature & altitude
* other benefits include excellent starting & excellent throttle response
* cold start knob also doubles as an idle adjuster
* The injector spray pattern, spray direction and the distance to the intake
valves have been optimized. Forward mounted straight intake tract helps to
maximize the benefits of the FI system & overall power output.
* Optional, compact, hand held "GYTR Power Tuner" allows tailoring of both
fuel injection duration & ignition mapping.
* 9- different setting points can be accessed for both fuel duration &
* maps can be stored & shared with other Power Tuners if desired
* easy access GYTR Power Tuner connector port
* Revised forward mounted air box with washable, dual stage foam air filter.
* No tools required to access air filter
* new air box cover & new quick release fastners
* washable design reduces maintenance costs
* Launch control system (LCS).
* provides smoother, quicker starts with less wheel spin & front wheel lift
* allows rider to concentrate on clutch control, body position & machine
* system functions in 1st & 2nd gears only and is disabled as soon as the
bike is shifted into 3rd gear
* ECU controls the system and adjusts rpm to limit wheel spin & wheelies
* activation button is on the LHS handlebar & features a LED indicator light.
* Special "G" sensor system
* shuts down fuel injection system if bike lies on its side for more than 10
* helps prevent costly engine damage
* no special procedure to re-start the bike... just kick it and go.
* Works-style race-spec "barrel adjuster" for on-the-fly clutch lever free
* Compact, lightweight "Bilateral Beam" aluminum frame.
* centralizes mass for exceptional handling & manoeuvrability
* frame offers an optimum rigidity balance between strength, rigidity & tuned
flex, plus excellent shock absorbing qualities
* frame design offers excellent "rider - machine communication" (a.k.a.
* key goal of the chassis is fast & easy cornering ... one of the main keys
to winning races
* Lightweight, tapered aluminum swingarm.
* lightweight design reduces unsprung weight for optimum suspension
* excellent rear wheel traction & control
* 25mm rear axle
* Lightweight detachable rear sub frame.
* constructed of square-section, lightweight aluminum pipe with no bends
* allows easy access when servicing rear suspension components
* detachable design reduces costs in the event of a loop out
* Adjustable handlebar holders offer a total of 4 different handlebar
positions with an adjustment range of 30mm.
* suits wide variety of rider sizes
* handlebar holders are rubber mounted for reduced vibration & improved rider
* Fork also features a Transfer Control Valve (TCV).
* TCV enhances damping from mid to full stroke & improves bottoming
* TCV offers more precise control throughout the full suspension stroke
* TCV is located on the upside of the spring & its function is controlled by
piston speed, not piston position, hence the term "Speed Sensitive System fork".
* Monocross link rear suspension with 315 mm (12.4") of wheel travel.
* features a fully adjustable Kayaba piggyback shock
* separate adjusters for high- and low-speed compression damping
* shock is in-line with the center axis of the frame for excellent control
* shock adjustments include: threaded spring preload, 20 -way low-speed
compression damping, 2 turns of high speed compression damping & 30-way rebound
* 270mm floating front "wave-style" disc & compact Nissin twin piston caliper.
* wave disc design reduces weight & improves cooling (wave design offer more
surface area for better cooling)
* excellent braking performance
* "Shorty style" adjustable front brake lever can be adjusted to fit various
* 245 mm rear disc brake features a "wave-style" disc & single piston Nissin
caliper & master cylinder.
* revised rear motor for improved heat resistance
* Rear caliper & lower portion of the wave disc are protected by heavy duty
* Lightweight, plastic resin 7.5 litre fuel tank
* reduces centre of gravity & centralizes mass for exceptional handling & a
* tank can be flipped on its back without disconnecting fuel line (easy
servicing under the tank)
* compact in-tank electric fuel pump
* Compact body work.
* reduces weight & enhances the lightweight feel and look of the YZ450F
* flat design, "minimal" bodywork allows for fast, easy rider movements & a
natural riding position
* minimal design aids in keeping the body looking good (less plastic to
scratch or damage)
* graphics are impregnated directly into the plastic rad shrouds & will not
peel off or get damaged by pressure washing
* Flat seat design.
* provides easy rider movements
* features a "cap cover" to access the fuel cap
* non-slip seat cover material resists clogging with dirt or mud
* Rugged Excel rims.
* excellent durability
* reduces unsprung weight for optimal suspension performance & handling
* front rim size is 1.60 x 21", rear is 2.15 x 19"
* hub features second bearing on sprocket side for increased rigidity &